WARNING: Incorrectly inserting the connector can result in bent pins inside the port or possible overheating of the expansion board when connected. If a plug won’t fit easily into a port connector, do not force it. The connector side with the wires exposed should be facing toward the soldered “=” symbol as you insert into the port. With the expansion board facing up, look for the soldered “=” symbol on the left side of the port.
Take extra care when inserting connectors to ports of Expansion Boards. Connecting cable connectors to Expansion Boards Do NOT forcefully join LEGO® together around cables instead ensure they are laying comfortably in between each stud.ĬAUTION: Forcing LEGO® to connect over a cable can result in damaging the cable and light. Important things to note: Laying cables in between and underneath bricksĬables can fit in between and underneath LEGO® bricks, plates, and tiles providing they are laid correctly between the LEGO® studs. 1x Lego 1×1 round plate (transparent blue).1x Flat Battery Pack (requires 2x CR2032 Batteries).This user guide is also available to download in PDF format here. If you run into any issues, please refer to the online troubleshooting guide. To ensure a trouble-free installation of your light kit, please read and follow each step carefully. You purchase this kit on our official website.
The following page is instructions for the Light My Bricks LEGO Ghostbusters Ecto-1 (21108) LED light kit.
